Specification
1.Size
For 40-50 inches: 50×90 cm/19.68×35.43inch
For 55-65 inches:70×120cm/27.55×47.24inch
For 75-85 inches:90×160 cm/35.43×62.99inch
2.Weigh:510/570/710g
How to solve the issue of the backlight strip being half lit and half dark?
① Press and hold the reset button on the controller for 5 seconds. The strip should then flash red.
② After the red flash, unplug the power and wait for 10 seconds.
③ Reconnect the power. The strip will run a cycle of white light to test if all parts are functioning correctly. During this cycle, observe the previously unlit section to see if it begins to light up. If this section lights up normally, it indicates that there are no hardware faults with the strip, and it can continue to be used.
1.TV Ambient Backlight
Our Ambient TV Led Backlight is easy to operate, plug and play, and does not require WiFi or APP operation.Smart TV cannot be used alone with TV light strips,It requires an HDMI-Compatible 2.0 input source device to be used with this light strip, Such as For TV box, game console, laptop, PS4/PS5, etc. (Note: it does not support HDMI-Compatible 2.1).If you are not sure if your input source device is compatible with our light strip device, please contact our online customer service before purchasing, and we will reply to you within 24 hours.


2.The chip employs AI technology to automatically identify and synchronize lighting
Automatic Color Sampling Position Recognition

3.One-Button Start

4.Thermal Design For Longer Lifespan

5.Easy lnstallation
1.clean the back of the TV
2.Peel off the adhesive backing Of the light strip
3.Fix at the four corners on the back of the TV
4.Stick it to the back of the TV following the diagram/instructions.

6.Scene display




Note
1.Due to different displays and lighting effects, the actual color of the product may be slightly different from the color shown on the picture. Thanks!
2.Due to manual measurement, please allow a measurement deviation of 1-2cm.
Reviews
There are no reviews yet.